The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
| Lebar | Tingkat torsi | |||||||||||
| Od |  |  | B | C | ||||||||
| (Mm) | (Mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | M | ||||
| 180 | 7,087 | 16 | 30 | 204 | 142 | 250 | 75 | 40 | 60 | |||
| Mimiti 200 | 198-202 | 16 | 30 | 224 | 142 | 250 | 75 | 40 | 60 | |||
| 8.626 | 16 | 30 | 142 | 250 | 75 | 40 | 60 | |||||
| 250 | 9.843 | 16 | 25 | 282 | 142 | 250 | 75 | 40 | 80 | |||
| 267 | 10.512 | 16 | 25 | 299 | 142 | 250 | 75 | 40 | 80 | |||
| 273 | 10.748 | 16 | 25 | 305 | 142 | 250 | 75 | 40 | 80 | |||
| 304 | 10 | 20 | 336 | 142 | 250 | 75 | 40 | 80 | ||||
| 12.752 | 10 | 20 | 142 | 250 | 75 | 40 | 80 | |||||
| 355.6 | 352-359 | 8.5 | 16 | 142 | 250 | 75 | 40 | 80 | ||||
| 377 | 8.5 | 16 | 409 | 142 | 250 | 75 | 40 | 80 | ||||
| 7.5 | 16 | 438 | 142 | 250 | 75 | 40 | 80 | |||||
| 457.2 | 452-462 | 6,5 | 12 | 489 | 142 | 250 | 75 | 40 | 80 | |||
| 508 | 503-513 | 6 | 10 | 540 | 142 | 250 | 75 | 40 | 120 | |||
| 5.5 | 10 | 590.8 | 142 | 250 | 75 | 40 | 160 | |||||
| 5 | 10 | 142 | 250 | 75 | 40 | 160 | ||||||
| 4 | 5 | 142 | 250 | 75 | 40 | 160 | ||||||
| 762 | 4 | 5 | 794 | 142 | 250 | 75 | 40 | 160 | ||||
| 4 | 5 | 142 | 250 | 75 | 40 | 160 | ||||||
| 4 | 5 | 946.4 | 142 | 250 | 75 | 40 | 160 | |||||
| 1016 | 4 | 5 | 1048 | 142 | 250 | 75 | 40 | Mimiti 200 | ||||
| 3,5 | 5 | 142 | 250 | 75 | 40 | Mimiti 200 | ||||||
| 1219.2 | 3,5 | 5 | 142 | 250 | 75 | 40 | Mimiti 200 | |||||
| 3 | 5 | 142 | 250 | 75 | 40 | 240 | ||||||
| 3 | 5 | 142 | 250 | 75 | 40 | 240 | ||||||
| 1524 | 2,5 | 5 | 1556 | 142 | 250 | 75 | 40 | 240 | ||||
| 1625.6 | 64.000 | 2,5 | 5 | 142 | 250 | 75 | 40 | 240 | ||||
| 1727.2 | 2,5 | 5 | 142 | 250 | 75 | 40 | 240 | |||||
| 2 | 5 | 142 | 250 | 75 | 40 | 240 | ||||||
| 2 | 5 | 142 | 250 | 75 | 40 | 240 | ||||||
| 2032 | 2 | 5 | 2064 | 142 | 250 | 75 | 40 | 240 | ||||
| Matéri / komponén | V1 | V2 | V3 | V4 | V5 | V6 |
| Aisi 304 | Aisi 316l | Aisi 316l | Aisi 304 | |||
| Bolsgul | Aisi 304 | Aisi 316l | Aisi 304 | Aisi 304 | ||
| Aisi 304 | Aisi 316l | Aisi 304 | Aisi 304 | |||
Bahan gasket karét
| Matéri segel | Keungeut suhu | |
| -30 ℃ nepi ka + 120 ℃ | ||
| -70 ℃ nepi ka + 260 ℃ | ||
| 95 ℃ nepi ka + 300 ℃ |